Quick answer

To use a nail drill, start on a low speed with a fine sanding band or a soft bit. Hold the drill like a pencil, rest your hand for support, and keep the bit flat and moving across the nail. Never press hard or stay in one spot, and keep away from the skin. Practice on press-on tips first, and clean your bits after every use.

Key takeaways

  • Start slow. Low speeds are safest on natural nails.
  • Keep the bit moving and flat. Pressure and pausing cause heat and thin spots.
  • Use the right bit for the job: fine sanding bands for prep, carbide bits for removal.
  • Never drill your skin or cuticle with coarse bits.
  • Clean bits after each use to avoid spreading germs.
On this page

A nail drill, often called an e-file, makes gel prep and removal much faster. It can also do a lot of damage in the wrong hands. The trick is a light touch, low speed and patience while you learn.

Safety first

Before you switch it on, set yourself up for success.

  • Practice on press-on tips before you touch your own nails.
  • Wear eye protection if dust bothers you, and work in good light.
  • Start at the lowest speed.
  • Keep the bit moving and never press down.
  • Stay off your skin. Coarse bits can cut it quickly.

A review of nail cosmetics notes that manicures can cause mechanical, infectious and allergic problems 1. Gentle technique and clean tools avoid most of them.

Speeds and bits explained

BitGritUse it forSpeed
Fine sanding bandFineLight prep, removing shineLow
Fine carbide or ceramic barrelFineShaping, thinning gelLow to medium
Medium carbide barrelMediumRemoving gel or acrylic bulkMedium
Cone or flame bitFineCleaning the cuticle area, carefullyLow
Coarse carbideCoarseHeavy acrylic removal, not for natural nailsHigher, with care

Our list of nail drill bits explains which bits come in each set.

A nail drill, a file and a polish bottle on a butter background
Low speed, a light touch and constant movement.

Holding the drill

Hold the drill like a pencil. Rest your hand or pinky on the table for support. Keep the bit flat to the nail, not tilted on its edge, so it does not carve grooves.

Prepping natural nails

  1. Fit a fine sanding band or soft bit.
  2. Set the drill to low speed.
  3. Glide the bit lightly across the nail in short, even strokes to remove the shine.
  4. Do not thin the nail. If it feels warm, stop and lift.

Removing gel and acrylic

  1. Fit a medium carbide barrel bit.
  2. Use a medium speed and file away the top coat and most of the color.
  3. Keep moving across the whole nail.
  4. Stop before you reach the natural nail. Remove the last thin layer by soaking or with a hand file.

For soaking, the American Academy of Dermatology suggests soaking only your fingertips in acetone rather than your whole hands 2. See our post on removing gel polish at home.

Cleaning bits

StepHow
1. Remove dustBrush the bit with a small cleaning brush
2. WashSoap and warm water
3. DisinfectAs the maker recommends
4. DryFully, before storing
Sanding bandsThrow away after each use

Choosing a drill

For home use, look for adjustable speed, low vibration, a light handpiece and both forward and reverse. A cordless drill is handy if you move around. See the best nail drills for beginners, or for heavier acrylic work, the best nail drills for acrylics.

Questions people ask

What speed should I use on natural nails?

You should use a low speed on natural nails, around the lowest settings your drill offers. Natural nails are thin and heat up fast. Only raise the speed for removing gel or acrylic.

Which drill bit removes gel?

The drill bit that removes gel is usually a fine or medium carbide barrel bit or a sanding band. Remove most of the gel with the drill, then soak or file away the last thin layer so you do not thin your nail.

Can a nail drill damage my nails?

A nail drill can damage your nails if you press too hard, use high speed on natural nails, or stay in one spot. That causes heat, thin spots and ridges. A light touch and constant movement prevent it.

Should I drill forward or reverse?

You should drill forward when using your right hand on your left hand's nails, and switch to reverse for the other hand, if your drill has both. Reverse lets the bit move away from the cuticle on each side.

How do I clean nail drill bits?

To clean nail drill bits, brush off dust, wash them with soap and water, then disinfect them as the maker suggests and let them dry fully. Replace sanding bands after each use, since they cannot be cleaned well.

Is an e-file worth it for beginners?

An e-file is worth it for beginners who do gel or acrylic at home often, because it makes prep and removal much faster. If you only do regular polish, a glass file and buffer are enough.

Why does my nail feel hot when I drill?

Your nail feels hot when you drill because of friction from too much pressure, too high a speed or staying in one spot. Lift the bit, slow down and keep it moving.

Can I use a nail drill on toenails?

You can use a nail drill on toenails to smooth and shape them, using a low speed and a gentle bit. If you have diabetes, poor circulation or a nail infection, see a podiatrist instead.

Sources

  1. 1 Scheers C, Andre J, Richert B Nail cosmetology . Hand Surg Rehabil , 2024 ; 43S:101657 . Review
  2. 2 Gel manicures: Dermatologists share tips to keep nails healthy . American Academy of Dermatology . Medical organization

Gathering Perfection Editors

Beauty tool researchers

We read the reviews so you do not have to. For every list we compare ratings and how many people left them, read the newest reviews first, pay close attention to 4-star reviewers, and check the studies behind any tool that makes a claim.

How we choose products